The best camera mounts depend on what you need to attach and where you need to position it, from a monitor on a cage to a camera on a desk or handlebar. These picks cover flexible clamps, articulated arms, dedicated monitor supports, and a tabletop stand, so match the mount to your equipment and shooting setup.
Quick Top Products
SmallRig Cool Ballhead Arm Clamp 1138
- Clamps to rods, tubes, desks, and frames without drilling.
- Includes a super clamp and action camera mount adapter.
- Supports gear up to 1.5 kg.
Best For: Creators who want to clamp a small camera, light, or monitor to a desk, rod, or tube.
SmallRig 9.8-Inch Magic Arm Clamp Kit
- The kit includes a 9.8-inch arm and super clamp.
- Clamp threads include 1/4-inch and 3/8-inch sizes.
- Rubber cushions help protect surfaces and grip accessories.
Best For: Filmmakers who need to position a small monitor, light, or microphone away from a clamp point.
SmallRig Field Monitor Mount BSE2346
- Designed for 5-inch and 7-inch monitors.
- Swivels 360 degrees and tilts 140 degrees.
- Supports monitors weighing up to 1.2 kg.
Best For: Videographers attaching a 5-inch or 7-inch field monitor to a camera or support with a cold shoe.
SmallRig Monitor Mount 6314
- Uses a 3/8-inch-16 locating screw for ARRI at the base.
- Allows horizontal and vertical monitor installation.
- Provides 360-degree pan and 180-degree tilt.
Best For: Video creators mounting a monitor to an ARRI locating point with both horizontal and vertical orientation options.
SmallRig ARRI-Style Monitor Mount
- Made for 5-inch and 7-inch monitors.
- Provides 360-degree swivel and 180-degree tilt.
- Load limits vary by tilt angle.
Best For: Filmmakers who need a tool-adjustable ARRI-style monitor mount for a 5-inch or 7-inch display.
SmallRig Camera Monitor Mount 6313
- Fits into a cold shoe or hot shoe mount.
- Supports horizontal and vertical monitor installation.
- Offers 180-degree tilt and 360-degree pan.
Best For: Creators who need a quick cold-shoe monitor mount that can also be installed vertically.
SmallRig Camera Mount Clamp 4102B
- Includes a removable adapter for an action camera.
- The clamp accommodates rods from 14 mm and surfaces up to 65 mm thick.
- For movement, the device limit is 350 g and the speed guidance is below 50 km/h.
Best For: Action-camera users mounting to a bike or motorcycle handlebar while observing the stated movement limits.
SmallRig 15–35-Inch Adjustable Desk Mount
- Adjusts from 19 to 39 inches with the ballhead and C-clamp.
- Supports up to 3 kg.
- The C-clamp suits tables up to 1.85 inches thick.
Best For: Streamers and creators who need an adjustable-height camera, phone, or ring-light stand clamped to a desk.
SmallRig 11-Inch Magic Arm Clamp 5311
- Includes an 11-inch magic arm and crab-shaped clamp.
- The clamp fits supports from 15 to 40 mm in diameter.
- Maximum payload is 1.5 kg.
Best For: Vloggers and creators who need an 11-inch clamped arm for a compact action camera, monitor, light, or microphone.
SmallRig 7-Inch Magic Arm Clamp 5310
- The kit includes a 7-inch arm and crab-shaped clamp.
- The arm has a 1/4-inch-20 screw and retractable pins.
- Maximum payload is 1.5 kg.
Best For: Creators who want a compact clamped arm for an action camera, monitor, light, or microphone.
Versatile Desk and Rod Clamp
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The SmallRig 1138 combines a super clamp with a double ballhead adapter, giving you a flexible way to position a camera or accessory without drilling into a desk or frame. It accepts a range of gear through a 1/4-inch-20 screw and includes an action camera adapter.
The clamp supports up to 1.5 kg, so it suits compact setups rather than heavy camera builds. Its aluminum and stainless-steel construction and anti-twist structure add useful stability, while the safety-rope note matters when you use it in a dynamic setting.
Check that the surface or rod fits the clamp and that your accessory uses a compatible connection.
Best For: Creators who want to clamp a small camera, light, or monitor to a desk, rod, or tube.
| Pros | Cons |
|---|---|
|
|
Choose the 1138 when you need one clamp for a desk, rod, or frame and want an action-camera adapter included. Its broad accessory compatibility is useful for compact lights, microphones, and monitors, but its stated 1.5 kg capacity is lower than some heavier-duty clamp options in this roundup.
Confirm both the clamp surface and the accessory connection before buying. For moving setups, follow the safety-rope guidance.
Long Reach Articulating Clamp Kit
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This SmallRig kit pairs a super clamp with a 9.8-inch articulating arm, making it useful when a camera accessory needs more reach than a compact ballhead can provide. The arm has 1/4-inch screws at both ends, while the clamp offers 1/4-inch and 3/8-inch threads and opens from 15 mm to 54 mm.
Double ballheads rotate through 360 degrees for angle adjustment. Rubber cushions help protect surfaces and tighten the grip.
This is a flexible accessory mount, but it is not a magnetic clamp and is not corrosion-resistant for seawater use, so choose a suitable mounting environment.
Best For: Filmmakers who need to position a small monitor, light, or microphone away from a clamp point.
| Pros | Cons |
|---|---|
|
|
This kit is a practical pick when you need a longer reach and want the arm and clamp together. Its 9.8-inch arm and dual thread options suit monitors, microphones, and small lights on a rig or nearby support.
It emphasizes arm reach and mounting flexibility. Check the clamp opening against the support and avoid seawater environments.
Cold-Shoe Monitor Holder
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
The BSE2346 is a dedicated field-monitor holder with a cold-shoe adapter and a bottom 1/4-20 screw. It is designed for 5-inch and 7-inch monitors and supports up to 1.2 kg, making it more specific than a general-purpose clamp.
The holder swivels 360 degrees horizontally and tilts 140 degrees vertically, with thumbscrews for manual adjustment. Rubber cushions add friction and help guard against scratches.
Choose it when your support has a cold shoe and your monitor falls within its supported size and weight; check the interface and payload before setting up.
Best For: Videographers attaching a 5-inch or 7-inch field monitor to a camera or support with a cold shoe.
| Pros | Cons |
|---|---|
|
|
Pick this holder when you want a straightforward cold-shoe connection for a field monitor and the 140-degree tilt range meets your framing needs. Its specified screen sizes and 1.2 kg limit make compatibility relatively clear.
Before buying, verify your monitor's screw interface, weight, and the shoe available on your camera or rig.
ARRI Mount for Portrait or Landscape Monitoring
SMALLRIG Adjustable Camera Monitor Mount with 3/8"-16 Locating Screw for ARRI, 360° Swivel and 180° Tilt, Anti-Twist 1/4" Locating Screw, Horizontal & Vertical Shooting
SmallRig's 6314 connects a monitor to a camera cage, top handle, or other support through a bottom 3/8-inch-16 locating screw for ARRI. Its top retractable 1/4-inch-20 locating screw, locating pins, and silicone pad are designed to resist monitor twisting and scratching.
The mount supports horizontal and vertical installation, with 360-degree pan and 180-degree tilt for repositioning. A thumb knob handles adjustment, and an included L-shaped Allen wrench provides extra tightening.
Check that your support has the matching ARRI locating point and that the monitor accepts the top connection.
Best For: Video creators mounting a monitor to an ARRI locating point with both horizontal and vertical orientation options.
| Pros | Cons |
|---|---|
|
|
This mount is a strong fit for rigs that already provide an ARRI locating hole and for creators who want to switch between landscape and portrait framing. It offers tilt travel and explicit vertical installation, while depending on a locating-screw base connection.
The record does not give a maximum payload, so check the mount's compatibility details against your monitor before relying on it for a heavier display.
Adjustable ARRI Monitor Support
SmallRig Adjustable Camera Monitor Mount for ARRI-Style (Upgrade), 360° Swivel and 180° Tilt Monitor Holder Anti-Twist Support 5” and 7” Field Monitor
This adjustable SmallRig monitor mount is designed for 5-inch and 7-inch field monitors attached through an ARRI-style mount. It swivels 360 degrees and tilts 180 degrees, with a knob for quick adjustment instead of relying on an Allen wrench for routine positioning.
The top has locating pins and a silicone pad intended to help prevent monitor twisting and scratching. Its notes provide angle-specific load limits, so the usable capacity depends on the tilt position.
Confirm the support has an ARRI locating point and compare your monitor's weight with the limit for the angle you plan to use.
Best For: Filmmakers who need a tool-adjustable ARRI-style monitor mount for a 5-inch or 7-inch display.
| Pros | Cons |
|---|---|
|
|
Choose this mount if your cage or support has an ARRI-style point and you want broad tilt and swivel adjustment with a hand knob. It uses an ARRI-style locating screw connection, and its load guidance changes by angle rather than giving one universal figure.
Check the monitor weight against the stated capacity for your intended tilt, then confirm that your cage has the matching locating point.
Cold-Shoe Mount with Portrait Support
SMALLRIG Camera Monitor Mount with Cold Shoe, 180° Tilt and 360° Swivel, Retractable 1/4" Locating Screw Anti-Twist, Damping Adjust, Horizontal & Vertical Shooting
The 6313 is a compact monitor support that slides into a cold shoe or hot shoe and locks in place. Its top uses a retractable 1/4-inch-20 locating screw, locating pins, and a silicone pad to help keep a compatible monitor from twisting or getting scratched.
It tilts 180 degrees and pans 360 degrees, and it supports horizontal or vertical installation. A thumb knob adjusts the angle and damping, while an included Allen wrench allows added tightening.
Check the shoe type and monitor connection on your equipment before choosing it; its notes do not provide a maximum payload.
Best For: Creators who need a quick cold-shoe monitor mount that can also be installed vertically.
| Pros | Cons |
|---|---|
|
|
Pick this mount when a shoe connection is the easiest way to add a monitor and vertical installation matters. Its 180-degree tilt gives it broad movement, but the record gives no payload figure, so verify suitability for your display before mounting it.
If your cage has an ARRI locating point and you prefer that connection, choose an ARRI-style locating-screw mount.
Handlebar and Action-Camera Clamp
SMALLRIG Camera Mount Clamp, Gopro Motorcycle and Bike Handlebar Mount Kit
The SmallRig 4102B combines a crab-shaped clamp, a 360-degree ballhead, and a removable action-camera adapter. It can attach to round pipes, tables, tripods, and handlebars, with a minimum supported rod diameter of 14 mm and surface thickness up to 65 mm.
For stationary use, its maximum load is 3.5 kg; the movement guidance is much more restrictive, limiting device weight to 350 g, speed to below 50 km/h, and advising against rough terrain. Those distinctions are central to choosing this mount.
Check your handlebar fit and stay within the movement limits for the intended setup.
Best For: Action-camera users mounting to a bike or motorcycle handlebar while observing the stated movement limits.
| Pros | Cons |
|---|---|
|
|
This is the most directly suited option here for handlebar mounting, especially when the removable action-camera adapter matches your camera. Its stationary rating should not be confused with its much lower moving-use limit; for riding, follow the 350 g, terrain, safety-cord, and speed guidance.
Check the jaw range and threaded holes against your support and accessories.
Height-Adjustable Desktop Camera Stand
SMALLRIG Camera Mount C Stand, 15"-35" Adjustable Desk Clamp Table Tripod
This SmallRig desktop stand uses a C-clamp to attach to a table and three extending pole sections to raise a camera, phone, or ring light. The notes give a working height range of 19 to 39 inches with the ballhead and clamp, and describe a 1/4-inch screw ballhead with 360-degree rotation and front tilt adjustment.
The stand supports up to 3 kg and the clamp suits tables up to 1.85 inches thick. It also includes a ring-light adapter.
Check table thickness, available desk space, and the required device connection before choosing a fixed desktop support.
Best For: Streamers and creators who need an adjustable-height camera, phone, or ring-light stand clamped to a desk.
| Pros | Cons |
|---|---|
|
|
Choose this stand for a home studio or streaming desk where you want height adjustment without spreading tripod legs across the floor. It is a different kind of camera mount from the compact clamps and monitor holders: it occupies a desk edge and offers an extended pole.
Check the actual desk thickness and make sure the 1/4-inch ballhead matches your camera or accessory. Its 3 kg limit applies to the stand's supported load.
Compact Anti-Twist Magic Arm
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The 5311 combines an 11-inch magic arm with a crab-shaped clamp and a 1/4-inch-20 screw with retractable pins. The pins are intended to resist twisting, and the clamp accommodates tubes, tables, tripod legs, or stabilizer rings from 15 to 40 mm in diameter.
All joints can be loosened together with the wingnut and locked back into position. Its maximum payload is 1.5 kg, making it suitable for compact accessories within that limit.
Confirm the attachment interface and clamp diameter range, and account for the arm's reach when positioning the device.
Best For: Vloggers and creators who need an 11-inch clamped arm for a compact action camera, monitor, light, or microphone.
| Pros | Cons |
|---|---|
|
|
This arm suits a compact setup that benefits from an 11-inch reach and a clamp that fits common tubes or table edges within its stated diameter range. The retractable pins address twisting at the accessory connection, while the wingnut adjustment is convenient for changing the arm position.
Choose based on the reach you need and the space available.
Short-Reach Anti-Twist Magic Arm
SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
The SmallRig 5310 uses the same basic clamp-and-arm approach as a longer magic arm but with a 7-inch arm for closer accessory placement. A 1/4-inch-20 screw and retractable pins connect compatible gear, while the crab clamp accommodates tubes, tables, tripod legs, and stabilizer rings from 15 to 40 mm in diameter.
The wingnut loosens the joints together for repositioning and locks them in place. Its maximum payload is 1.5 kg.
This shorter reach can make a rig easier to arrange in tight spaces, but check the clamp fit and payload for your equipment.
Best For: Creators who want a compact clamped arm for an action camera, monitor, light, or microphone.
| Pros | Cons |
|---|---|
|
|
Choose this arm when you want a clamped mount with a 7-inch reach. It has a 1.5 kg maximum payload and a 15 to 40 mm clamp range, so check how far the accessory needs to sit from the support.
Confirm that the retractable-pin connection matches your accessory.
How to Choose Camera Mounts
How We Picked Camera Mounts
A useful camera mount should solve a clear positioning job: clamping to a desk or bar, extending an accessory with an arm, holding a field monitor, or raising a camera above a workspace. The selected products cover those different setups and provide enough detail to check how they attach and what equipment they support.
We favored products with a defined mounting interface, useful adjustment, and stated fit or load guidance. The roundup includes general-purpose clamps, two arm lengths, dedicated monitor supports, a handlebar option with explicit motion limits, and a desktop stand.
Camera cages, rig handles, rodblocks, a power-bank holder, and a wearable head strap serve narrower or different functions.
Comparing Camera Mount Types
Start with the support point. A clamp kit can attach to a desk edge, tube, or frame, while a cold-shoe monitor mount needs a compatible shoe.
An ARRI-style monitor holder requires the matching locating point on a cage or handle. The desktop stand instead clamps to a table edge and raises the camera or light above the work surface.
Reach changes how a rig fits together. The 9.8-inch kit provides more separation from its clamp point, while the 7-inch and 11-inch SmallRig arms suit closer positioning or extra clearance.
The 1138 is a compact alternative when you want a dual-ballhead clamp with an action-camera adapter. Match arm reach to the available space and check the supported payload before attaching gear.
Monitor mounts differ by interface and movement. The BSE2346 has a cold shoe and 140-degree tilt for 5-inch and 7-inch monitors.
The 6313 also mounts through a shoe and supports vertical installation, while the 6314 uses an ARRI locating screw and offers portrait or landscape placement. The adjustable ARRI-style holder specifies different load limits by tilt angle.
Check the complete mounting path from camera cage to monitor, not just the top screw.
| Product | Standout features | Best for |
|---|---|---|
| SmallRig Cool Ballhead Arm Clamp 1138Check Price |
| Creators who want to clamp a small camera, light, or monitor to a desk, rod, or tube. |
| SmallRig 9.8-Inch Magic Arm Clamp KitCheck Price |
| Filmmakers who need to position a small monitor, light, or microphone away from a clamp point. |
| SmallRig Field Monitor Mount BSE2346Check Price |
| Videographers attaching a 5-inch or 7-inch field monitor to a camera or support with a cold shoe. |
| SmallRig Monitor Mount 6314Check Price |
| Video creators mounting a monitor to an ARRI locating point with both horizontal and vertical orientation options. |
| SmallRig ARRI-Style Monitor MountCheck Price |
| Filmmakers who need a tool-adjustable ARRI-style monitor mount for a 5-inch or 7-inch display. |
| SmallRig Camera Monitor Mount 6313Check Price |
| Creators who need a quick cold-shoe monitor mount that can also be installed vertically. |
| SmallRig Camera Mount Clamp 4102BCheck Price |
| Action-camera users mounting to a bike or motorcycle handlebar while observing the stated movement limits. |
| SmallRig 15–35-Inch Adjustable Desk MountCheck Price |
| Streamers and creators who need an adjustable-height camera, phone, or ring-light stand clamped to a desk. |
| SmallRig 11-Inch Magic Arm Clamp 5311Check Price |
| Vloggers and creators who need an 11-inch clamped arm for a compact action camera, monitor, light, or microphone. |
| SmallRig 7-Inch Magic Arm Clamp 5310Check Price |
| Creators who want a compact clamped arm for an action camera, monitor, light, or microphone. |
Choosing a Clamp or Arm for Your Camera Setup
For a desk, shelf, or studio rig, check the clamp's opening range and whether its contact pads suit the surface. The 1138 supports up to 1.5 kg and covers several support types.
The 9.8-inch kit opens from 15 to 54 mm and has threaded attachment points, while the newer 7-inch and 11-inch arms fit supports from 15 to 40 mm and use a stated 1.5 kg maximum payload.
A handlebar mount needs extra care because stationary capacity and moving-use guidance can differ. The 4102B has a higher stationary rating, but its notes limit moving device weight to 350 g, advise avoiding rough terrain, and set speed guidance below 50 km/h.
Follow those specific limits and use a safety cord as directed. For a desk streaming camera, a dedicated C-clamp stand may be easier to adjust and keep out of the way of floor space.
Which Camera Mount Fits Your Workflow?
Choose the desktop stand for a home studio or livestream where height adjustment and a table clamp matter. Pick a short magic arm for a compact rig, or a longer arm when the accessory needs more reach.
For an action camera on a bike or motorcycle, consider the 4102B only if your setup follows its movement limits.
If you are mounting a field monitor, begin with the connection on your cage or camera. Use a cold-shoe option when that interface is available, or an ARRI-style support when your rig has the locating point.
Confirm screen fit, screw type, weight guidance, and the orientation you need. The right camera mount is the one whose support, connector, reach, and payload suit the specific rig you plan to build.